Uneven concrete floor joint marked with yellow paint

Factory Floor Leveling in Omaha, NE

A factory floor that has settled throws machines out of level and makes every joint a hazard for carts and forklifts. We raise and support production floors with mudjacking.

  • Free quotes
  • 10-year warranty
  • Mudjacking specialists
10Year
Warranty

Every lift is backed by a 10-year warranty

Our mudjacking is warrantied for 10 years against shrinkage or deterioration of the material.

Get a free quote

Signs a factory floor needs leveling

Machines need shimming

Equipment keeps drifting out of level because the slab under it is moving.

Rough forklift lanes

Loads bounce at the joints and operators slow down to cross them.

Hollow-sounding slabs

The floor drums under traffic, which means there is empty space below.

Water or coolant pooling

Low spots collect liquid instead of letting it run to the drains.

Raised lip in a factory floor marked with yellow paint
Floor joint out of level
Factory floor with machinery on a concrete slab
Machinery sitting on the slab
Forklifts parked on a factory floor
Forklift lanes
Industrial building with a concrete floor
Open production floor

Why factory floors settle

Production floors take point loads from machines and constant traffic from forklifts. Vibration and weight work on any soft spot in the fill until a void opens under the slab.

Leaking process water, floor drains and old utility trenches are common places for soil to wash out.

Mudjacking fills the void with crushed-rock grout and raises the slab back to grade. Because the material is cement-based and dense, it suits floors that carry heavy loads.

Commercial interior concrete floor
Mudjacking pump cart loaded with grout on a job

How we do it

  1. Drilling a small hole through a concrete slab

    Drill

    We drill a pattern of holes, about an inch across, through the settled slab.

  2. Mudjacking nozzle pumping grout through a drilled hole

    Pump

    Grout is pumped under the slab. It fills the empty space, then pressure raises the concrete back to grade.

  3. Crew cleaning up after mudjacking

    Patch

    We patch the holes with concrete and clean up before we leave.

What it costs

Leveling a factory floor costs a fraction of removing and replacing slabs, and it avoids the long cure time that keeps a production area closed.

We look at every job before we price it. Quotes are free and written, and the work carries a 10-year warranty.

Other commercial concrete we raise

Common questions

Can you work around running equipment?

We need clear access to the slabs we are lifting and a safe work zone. Tell us what can and cannot be moved and we will plan around it.

Can you level the slab under a machine?

Often, yes, by drilling around the base. It depends on the machine and how it is anchored, so we look first.

Is there a lot of dust or mess?

Drilling makes some dust and the grout is wet. We contain the work area and clean up before we leave.

Factory floor with machinery on a concrete slab

Get your free quote

Tell us about the building and what has settled. We will come out, look at it and give you a written price.

(402) 802-9953

Call or text any time.

Every lift is backed by our 10-year warranty.